Ultra-Berm Builder®
Build a barrier around machinery or equipment that is permanently mounted or cannot easily be moved
Most of UltraTech’s spill containment products are designed to be put in place and then have the potential offending “spillers” placed in or on the containment unit. But large, heavy, or previously secured/bolted down equipment or machinery can make that very difficult or impossible.
The Ultra-Berm Builder solves that problem. This component system can be built to just about any size and/or shape that might be needed for your spill containment application.
Product Highlights
- Component system provides flexibility to create a semi-permanent, high-visibility custom barrier.
- Durable, vinyl covering resists oils, coolants, and most chemicals.
- Cut-to-length and secure to floor with included sealant, then seal seams with the vinyl adhesive.
- Economical containment for leaks and spills around machinery and equipment - no need to build expensive cement or angle iron curbs.
- High-visibility yellow color draws attention to the barrier for increased safety.
- Easy removal requires only a flat-bladed shovel.
Additional Information
- The Ultra-Berm Builder is an open-cell foam that is wrapped in vinyl.
- The Ultra-Berm Builder’s sidewalls are designed to be able to be stepped on and/or rolled over with light, wheeled equipment. The open-cell foam barrier will spring back after the weight is removed.
- If the area that needs contained is larger than what is covered by the full kit, you can always add more straight sections (Part# 8641) and/or more corners (Part# 8642) or whatever is needed for your particular application. All of the components and accessories for the Ultra-Berm Builder are available separately.
- The Ultra-Berm Builder is meant to a “long-term” installation. Should it become necessary, it can be removed using a flat-bladed shovel.
- The Ultra-Berm Builder is designed for use on flat, smooth surfaces.
- The berm builder is designed to be easily cut if necessary. Simply use a utility knife and a straight edge (NOTE: Always wear the appropriate personal protective equipment (PPE)).
WARNING: Part #8640-#8643 and #8674-#8676 can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP) which is known to the state of California to cause cancer, birth defects, or reproductive harm. Part #8644 can expose you to chemicals including 1-2-Benzenedicarboxylic acid - di-C8-10-branched alkyl esters - C9-rich which is known to the state of California to cause cancer. Part #8645 can expose you to chemicals including Toluene which is known to the state of California to cause reproductive toxicity. For more information, please visit www.P65Warnings.ca.gov